PITT PENN OIL COMPANY -- ATF DEXRON III MERCON -- 9150-01-353-4799
=====================  Product Identification  =====================

Product ID:ATF DEXRON III MERCON
MSDS Date:02/11/1997
FSC:9150
NIIN:01-353-4799
=== Responsible Party ===
Company Name:PITT PENN OIL COMPANY
Address:426 FREEPORT ROAD
Box:296
City:CREIGHTON
State:PA
ZIP:15030
Country:US
Info Phone Num:412-226-2712
Emergency Phone Num:412-226-2712;800-255-3924(CHEMTEL)
CAGE:0A1G5
=== Contractor Identification ===
Company Name:PITT PENN OIL CO
Address:426 FREEPORT RD
Box:296
City:CREIGHTON
State:PA
ZIP:15030-0296
Country:US
Phone:724-226-2712
CAGE:0A1G5

=============  Composition/Information on Ingredients  =============

Ingred Name:DISTILLATES, SOLVENT-DEWAXED LIGHT PARAFFINIC
CAS:64742-56-9
RTECS #:PY8039500
Fraction by Wt: <45%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:300 PPM
ACGIH TLV:300 PPM

Ingred Name:MINERAL OIL, PETROLEUM DISTILLATE, SOLVENT DEWAXED (MILD),
    HEAVY PARAFFINIC
CAS:64742-65-0
RTECS #:PY8038500
Fraction by Wt: <45%
Other REC Limits:NONE RECOMMENDED

Ingred Name:LUBE OIL ADDITIVE (SEE FOLLOWING INGREDIENTS)
Fraction by Wt: <15%
Other REC Limits:NONE RECOMMENDED

Ingred Name:BORATED POLYBUTENYL SUCCINIC ANHYDRIDE
Other REC Limits:NONE RECOMMENDED

Ingred Name:NITROGEN FUNCTIONALIZED DISPERSANT
Other REC Limits:NONE RECOMMENDED

Ingred Name:SUBSTITUTED ALKLYL PHOSPHITE
Other REC Limits:NONE RECOMMENDED

Ingred Name:ALKYL AMINE
Other REC Limits:NONE RECOMMENDED

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NOT GIVEN FOR PRODUCT AS A WHOLE
Routes of Entry: Inhalation:NO	Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:NO SIGNIFICANT ADVERSE HEALTH EFFECTS
    ARE EXPECTED TO OCCUR UPON SHORT TERM INHALATION EXPOSURE, EYE
    CONTACT, SKIN CONTACT, INGESTION. PROLONGED AND/OR REPEATED SKIN
    CONTACT WITH THIS MATERIAL PRODUCE S SKIN IRRITATION AND
    INFLAMMATION.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
    CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
    CARCINOGENS.
Effects of Overexposure:SKIN IRRITATION, INFLAMMATION.
Medical Cond Aggravated by Exposure:PERSONNEL WITH PRE-EXISTING SKIN
    DISORDERS SHOULD AVOID CONTACT.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH WITH WATER FOR 15 MINUTES WHILE HOLDING EYELIDS
    OPEN. GET MEDICAL ATTENTION. SKIN: REMOVE CONTAMINATED CLOTHING.
    WASH WITH SOAP AND WATER. IF IRRITATION PERSIST, GET MEDICAL
    ATTENTION. INH ALATION: REMOVE TO FRESH AIR. RESTORE BREATHING. GET
    MEDICAL ATTENTION. INGESTION: DO NOT INDUCE VOMITING. GET MEDICAL
    ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:380F,193C
Lower Limits:NOT GIVEN
Upper Limits:NOT GIVEN
Extinguishing Media:DRY CHEMICAL, CARBON DIOXIDE. FOAM AND WATER FOG
    ARE EFFECTIVE BUT CAUSE FROTHING.
Fire Fighting Procedures:DO NOT ENTER ANY ENCLOSED OR CONFINED FIRE
    SPACE WITHOUT PROPER PROTECTIVE EQUIPMENT. COOL TANKS AND CONTAINER
    EXPOSED TO FIRE WITH WATER. LIQUID WILL FLOAT.
Unusual Fire/Explosion Hazard:SLLIGHTLY COMBUSTIBLE. WHEN HEATED ABOVE
    FLASH POINT WILL RELEASE FLAMMABLE VAPORS WHICH CAN BURN IF EXPOSED
    TO IGNITION SOURCE. KEEP AWAY FROM EXTREME HEAT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:CONTAIN SPILL AND PREVENT IT FROM ENTERING ALL
    WATER BODIES, IF POSSIBLE. SAFETY STOP FLOW OF SPILL. EVACUATE NON-
    ESSENTIAL PERSONNEL FROM IMMEDIATE SPILL AREA. ABSORBENT MATERIALS
    AND PADS CAN BE US ED. COMPLY WITH ALL APPLICABLE REGULATIONS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:TO AVOID PRODUCT DEGRADATION, WATER
    CONTAMINATION SHOULD BE AVOIDED AND MINIMUM FEASIBLE HANDLING
    TEMPERATURES SHOULD BE MAINTAINED.
Other Precautions:PERIODS OF EXPOSURE TO HIGH TEMPERATURES (>200F)
    SHOULD BE MINIMIZED. PRODUCT DEGRADATION MIGHT INCREASE HEALTH
    HAZARD RISKS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE IS NEEDED UNDER ANTICIPATED USE CONDITIONS
    WITH ADEQUATE VENTILATION. IF EXPOSURE EXCEEDS THE OCCUPATIONAL
    EXPOSURE LIMITS, FOLLOW OSHA STANDARDS OR EQUIVALENT AND WEAR
    PROPER NIOSH/MSHA APPROVED	RESPIRATORY EQUIPMENT.
Ventilation:LOCAL EXHAUST AND MECHANICAL (GENERAL) VENTILATION AS
    REQUIRED TO MAINTAIN EXPOSURE LEVELS.
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES/GOGGLES
Other Protective Equipment:CHEMICAL RESISTANT CLOTHING AS NECESSARY TO
    PREVENT SKIN CONTACT. AN EMERGENCY EYEWASH AND SHOWER SHOULD BE
    AVAILABLE.
Work Hygienic Practices:WASH HANDS THOROUGHLY WITH SOAP AND WATER
    BEFORE EATING, DRINKING, SMOKING OR USING TOILET FACILITIES.
Supplemental Safety and Health
DO NOT USE GASOLINE, SOLVENTS, KEROSENE OR HARSH ABRASIVE SKIN CLEANERS
    FOR WASHING EXPOSED SKIN AREAS. REMOVE OILSOAKED CLOTHING AND
    LAUNDER BEFORE REUSE. LAUNDER OR DISCARD CONTAMINATED LEATHER GLOV
    ES AND SHOES.

==================  Physical/Chemical Properties  ==================

HCC:V6
Boiling Pt:B.P. Text:>675F,>357C
Melt/Freeze Pt:M.P/F.P Text:NOT GIVEN
Vapor Pres:< 0.1
Vapor Density:> 10
Spec Gravity:0.87
Evaporation Rate & Reference:NOT GIVEN
Solubility in Water:NEGLIGIBLE
Appearance and Odor:RED-COLORED LIQUID; LUBE OIL ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:EXTREME HEAT, OPEN FLAME, WATER
    CONTAMINATION
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

====================  Disposal Considerations  ====================

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
    ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSAL CONTAINER OR
    LINER IN ACCORDANCE WITH ALL FEDERAL, STATE AND LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.