HERCULES CHEMICAL -- SOLDERING PASTE  -- 3439-00F004182
<pre>=====================  Product Identification  =====================

Product ID:SOLDERING PASTE
MSDS Date:01/01/1987
FSC:3439
NIIN:00F004182
=== Responsible Party ===
Company Name:HERCULES CHEMICAL/NEW YORK, NY 10018
Emergency Phone Num:(212) 869-4330
CAGE:84794
=== Contractor Identification ===
Company Name:HERCULES CHEMICAL CO INC
Address:111 SOUTH STREET(OLD IS 29 W 38 ST)
Box:City:PASSAIC
State:NJ
ZIP:07055-7398
Country:US
Phone:973-778-5000
CAGE:84794

=============  Composition/Information on Ingredients  =============

Ingred Name:ZINC CHLORIDE  (SARA III)
CAS:7646-85-7
RTECS #:ZH1400000
OSHA PEL:1 MG/M3/2 STEL
ACGIH TLV:1 MG/M3/2STEL FUME93
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

=====================  Hazards Identification  =====================

Effects of Overexposure:ZINC CHLORIDE CONTACT, THERE ARE INCONCLUSIVE
    UNVERIFIED REPORTS OF HUMAN SENSITIZATION.

=====================  Fire Fighting Measures  =====================

Flash Point:580F (COC)
Extinguishing Media:DRY CHEMICAL, CO2, WATER FOG
Fire Fighting Procedures:DON'T ENTER CONFINED FIRE SPACE W/OUT PROPER
    EQUIPMENT.
Unusual Fire/Explosion Hazard:VAPORS WHICH CAN BURN/EXPLOSIVE IN
    CONFINED AREAS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:FLUSH WITH LARGE QUANTITIES OF WATER AND PICK
    UP WITH ABSORBING MATERIALS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:WASH THOROUGHLY AFTER HANDLING.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NOT REQUIRED FOR NORMAL USE.
Ventilation:MECHANICAL: EXHAUST FAN
Protective Gloves:RUBBER
Eye Protection:SAFETY GOGGLES
Supplemental Safety and Health
MSDS DATE: 18 JUN 1986. MELTING POINT: 120-140F.

==================  Physical/Chemical Properties  ==================

Spec Gravity:0.95
Solubility in Water:SLIGHT
Appearance and Odor:AMBER TO BROWN COLOR PASTE. ODOR NONE

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
CYANIDES/SULFIDE SALTS
Stability Condition to Avoid:AVOID CONTACT W/CONCENTRATED ALKALIES.
Hazardous Decomposition Products:WILL NOT OCCUR EXCEPT AT HIGH TEMP.

====================  Disposal Considerations  ====================

Waste Disposal Methods:LANDFILL; TO DISPOSE LARGE QUANTITIES, COMPLY
    WITH FEDERAL, STATE AND LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.