CHEMICAL SPECIALISTS AND DEVELOPMENT -- LINSEED OIL, BOILED  -- 8010-00-684-8789
<pre>=====================  Product Identification  =====================

Product ID:LINSEED OIL, BOILED
MSDS Date:10/01/1990
FSC:8010
NIIN:00-684-8789
=== Responsible Party ===
Company Name:CHEMICAL SPECIALISTS AND DEVELOPMENT
Address:5 HACKBERRY LANE
Box:3087
City:CONROE
State:TX
ZIP:77305
Country:US
Info Phone Num:409-756-1065
Emergency Phone Num:409-756-1065/1083 FAX DAVID /SHANAN
Preparer's Name:DAVID SHIPP
CAGE:4N760
=== Contractor Identification ===
Company Name:CHEMICAL SPECIALISTS AND DEVELOPMENT INC
Address:2210 HACKBERRY LN
Box:687
City:CONROE
State:TX
ZIP:77305
Country:US
Phone:409-756-1065
CAGE:4N760

=============  Composition/Information on Ingredients  =============

Ingred Name:BOILED LINSEED OIL
CAS:8001-26-1
RTECS #:OI9690000
Fraction by Wt: 100%
Other REC Limits:NONE SPECIFIED

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: NONE OBSERVED BY INHALATION.
    CHRONIC: NONE REPORTED.
Explanation of Carcinogenicity:NOT CARCINOGENIC.
Effects of Overexposure:INHALATION-INHALATION OF PRODUCT MAY CAUSE MILD
    IRRITATION OF NOSE & THROAT. EYE-MAY CAUSE REDNESS AND TEARING
    SKIN-SENSITIVE INDIVIDUALS MAY EXPERIENCE DERMATITIS AFTER LONG
    EXPOSURE OF OIL ON SKIN.  INGESTION-INGESTION OF LARGE AMOUNTS MAY
    CAUSE GASTROINTESTINAL UPSET.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYE: FLUSH WITH CLEAN LUKEWARM WATER FOR AT LEAST 15 MINUTES,
    OCCASIONALLY LIFTING THE EYEBALLS. SKIN: MAY BE REMOVED FROM SKIN
    BY WASHING WITH SOAP AND WARM WATER. INHALATION: EXPOSE INDIVIDUAL
    TO FR ESH AIR SOURCE. INGESTION: KEEP PERSON WARM AND QUIET AND
    SEEK MEDICAL ADVICE FOR PREVENTION OF POSSIBLE DEHYDRATION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:200F,93C
Autoignition Temp:Autoignition Temp Text:650 F
Extinguishing Media:FOAM, CO2, DRY CHEMICAL OR SAND IS RECOMMENDED.
Fire Fighting Procedures:AVOID USE OF WATER BUT IF ONLY ALTERNATIVE,
    IMPLEMENT. KEEP FIRE-EXPOSED CONTAINERS COOL.
Unusual Fire/Explosion Hazard:RAGS AND WASTE PAPER CONTAINING THIS
    MATERIAL MAY HEAT AND BURN SPONTANEOUSLY. STORE WIPING RAGS
    CONTAINING THIS MATERIAL IN METAL CANS WITH TIGHT LIDS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:DEPENDING ON QUANTITY OF SPILL- (A)SMALL
    SPILLS CAN BE PICKED UP WITH ABSORBENT MATERIAL AND TRANSFERRED TO
    CONTAINERS; (B)LARGE SPILLS CAN BE SCOOPED UP AND PUT INTO
    CONTAINERS OR SALVAGED. SEE DISPO SAL PRECAUTIONS BELOW.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE AWAY FROM HIGH TEMPERATURES AND
    FLAMES. DO NOT BREATHE SPRAY MIST.
Other Precautions:AVOID SPONTANEOUS COMBUSTION OF CONTAMINATED RAGS AND
    OTHER EASILY IGNITABLE ACCUMULATIONS BY IMMEDIATE IMMERSION IN
    WATER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NOT NORMALLY NEEDED.
Ventilation:INTERMITTENT CLEAN AIR EXCHANGES RECOMMENDED, BUT NOT
    REQUIRED.
Protective Gloves:NEOPRENE RUBBER GLOVES.
Eye Protection:SAFETY GLASSES WITH SIDE SHIELDS.
Other Protective Equipment:EYE BATH AND SAFETY SHOWER. TO PREVENT
    REPEATED OR PROLONGED SKIN CONTACT, WEAR IMPERVIOUS CLOTHING AND
    BOOTS.
Work Hygienic Practices:EYE WASHES AND SAFETY SHOWERS IN THE WORKPLACE
    ARE RECOMMENDED.
Supplemental Safety and Health
WE RECOMMEND THAT THE CONTAINERS BE EITHER PROFESSIONALLY RECONDITIONED
    FOR RE-USE BY CERTIFIED FIRMS OR PROPERLY DISPOSED OF BY CERTIFIED
    FIRMS TO HELP REDUCE THE POSSIBILITY OF AN ACCIDENT. DISPOSE 
    CONTAINERS PER APPLICABLE FEDERAL, STATE & LOCAL LAWS &
    REGULATIONS. "EMPTY" DRUMS SHOULD NOT BE GIVEN TO INDIVIDUALS.

==================  Physical/Chemical Properties  ==================

HCC:V4
Spec Gravity:0.9422
Solubility in Water:NEGLIGIBLE
Appearance and Odor:DARK AMBER, OILY LIQUID
Percent Volatiles by Volume:0
Corrosion Rate:NOT CORR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:SPONTANEOUS COMBUSTION CAN OCCUR.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

====================  Disposal Considerations  ====================

Waste Disposal Methods:CAREFULLY INCINERATE OR USE SECURE LANDFILL IN
    ACCORDANCE WITH LOCAL, STATE AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.