NATIONAL WELDERS SUPPLY CO INC -- NITROGEN -- 6830-01-028-9402
===================== Product Identification ===================== Product ID:NITROGEN MSDS Date:05/01/1996 FSC:6830 NIIN:01-028-9402 === Responsible Party === Company Name:NATIONAL WELDERS SUPPLY CO INC Address:810 GESCO Box:31007 City:CHARLOTTE State:NC ZIP:28231 Country:US Info Phone Num:704-333-5475(X308)/FAX 344-1711 Emergency Phone Num:800-866-4422/800-424-9300(CHEMTREC) CAGE:18264 === Contractor Identification === Company Name:NATIONAL WELDERS SUPPLY CO INC Address:810 GESCO ST Box:31007 City:CHARLOTTE State:NC ZIP:28231 Country:US Phone:704-333-5475 CAGE:18264 Company Name:NATIONAL WELDERS SUPPLY CO INC Address:HWY 117 NORTH Box:1093 City:GOLDSBORO State:NC ZIP:27530-8560 Country:US CAGE:9C482 Company Name:NATIONAL WELDERS SUPPLY CO, INC Address:2330 BOWDENS FERRY ROAD Box:City:NORFOLK State:VA ZIP:23508 Country:US Phone:804-627-5673 CAGE:0SSR7 ============= Composition/Information on Ingredients ============= Ingred Name:NITROGEN CAS:7727-37-9 RTECS #:QW9700000 Fraction by Wt: 100% Other REC Limits:NONE RECOMMENDED ACGIH TLV:ASPHYXIANT; 9596 ===================== Hazards Identification ===================== LD50 LC50 Mixture:ORAL LD50 (RAT) IS UNKNOWN. Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:NITROGEN IS DEFINED AS A SIMPLE ASPHYXIANT. NITROGEN IS NONTOXIC BUT THE LIBERATION OF A LARGE AMOUNT IN A CONFINED AREA COULD DISPLACE THE AMOUNT OF OXYGEN IN AIR NECESSARY TO SUPPORT LIFE. Explanation of Carcinogenicity:NONE Effects of Overexposure:INHALATION MAY CAUSE DIZZINESS, TIGHTNESS IN FRONTAL AREA OF FOREHEAD, TINGLING OF TONGUE, FINGERTIPS, TOES, WEAKENED SPEECH WITH INABILILTY TO UTTER SOUND, RAPID REDUCTION IN ABILITY TO PERFORM MOVEM ENTS, REDUCED CONSCIOUSNESS OF SURROUNDINGS, LOSS OF TACTILE SENSATIONS, HEIGHTENED MENTAL ACTIVITY. Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER. ======================= First Aid Measures ======================= First Aid:PROMPT MEDICAL ATTENTION IS MANDATORY. RESCUE WORKERS SHOULD WEAR SCBA. INHALATION: MOVE TO FRESH AIR. IF NOT BREATHING, GIVE CPR. IF BREATHING DIFFICULT, GIVE OXYGEN. GET MEDICAL ATTENTION. ===================== Fire Fighting Measures ===================== Extinguishing Media:NONFLAMMABLE, INERT GAS. USE MEDIA APPROPRIATE FOR SURROUNDING FIRE. Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT WHEN FIGHTING CHEMICAL FIRE. USE WATER SPRAY TO COOL SURROUNDING CONTAINERS. Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER. ================== Accidental Release Measures ================== Spill Release Procedures:EVACUATE PERSONNEL. USE APPROPRIATE PROTECTIVE EQUIPMENT. IF LEAK IS IN CONTAINER OR CONTAINER VALVE, CONTACT SUPPLIER. Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER. ====================== Handling and Storage ====================== Handling and Storage Precautions:STORE IN COOL, DRY, WELL VENTILATED AREA AWAY FROM HEAVY TRAFFICKED AREAS. DO NOT ALLOW TEMPERATURES TO EXCEED 130F. STORE CYLINDERS UPRIGHT. Other Precautions:FIRMLY SECURE CYLINDERS TO PREVENT FALLING. SEGREGATE FULL AND EMPTY CYLINDERS. USE FIRST IN FIRST OUT SYSTEM. USE ONLY IN WELL VENTILATED AREA. USE SUITABLE HAND TRUCK FOR CYLINDER MOVEMENT. DO NOT H EAT CYLINDER TO INCREASE DISCHARGE RATE. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:POSITIVE PRESSURE AIR LINE WITH MASK OR SELF CONTAINED BREATHING APPARATUS SHOULD BE AVAILABLE FOR EMERGENCY USE. Ventilation:USE LOCAL EXHAUST TO PREVENT ACCUMULATION OF HIGH CONCENTRATIONS THAT MAY REDUCE OXYGEN LEVEL TO BELOW 18 MOLAR PERCENT. Protective Gloves:ANY MATERIAL IS SUITABLE. Eye Protection:SAFETY GOGGLES OR SAFETY GLASSES. Other Protective Equipment:SAFETY SHOES RECOMMENDED. Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER. Supplemental Safety and Health USE A PRESSURE REDUCING REGULATOR WHEN CONNECTING CYLINDER TO LOWER PRESSURE (<3,000 PSIG) PIPING OR SYSTEMS. USE A CHECK VALVE OR TRAP IN THE DISCHARGE LINE TO PREVENT HAZARDOUS BACK FLOW INTO THE CY LINDER. PROTECT CYLINDERS FROM PHYSICALDAMAGE. NITROGEN IS NONCORROSIVE AND MAY BE USED WITH ANY STRUCTURAL MATERIAL.. ================== Physical/Chemical Properties ================== HCC:G3 NRC/State Lic Num:NOT RELEVANT Boiling Pt:B.P. Text:-321F,-196C Melt/Freeze Pt:M.P/F.P Text:-346F,-210C Vapor Density:0.97 Spec Gravity:0.001161 Viscosity:NOT RELEVANT Evaporation Rate & Reference:NOT RELEVANT Solubility in Water:VERY SLIGHTLY Appearance and Odor:COLORLESS, ODORLESS GAS Percent Volatiles by Volume:100 ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES NONE Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER. Hazardous Decomposition Products:NONE Conditions to Avoid Polymerization:WILL NOT OCCUR. ==================== Disposal Considerations ==================== Waste Disposal Methods:DO NOT DISPOSE OF WASTE OR UNUSED QUANTITIES. RETURN CONTAINER PROPERLY LABELED, WITH ANY VALVE OUTLET PLUGS OR CAPS SECURED AND VALVE PROTECTION CAP IN PLACE TO SUPPLIER. FOR EMERGENCY DISPOSAL ASSIS TANCE, CALL SUPPLIER. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.