COMPOSITITE INC -- BODY FILLER  -- 8030-00N041501
<pre>=====================  Product Identification  =====================

Product ID:BODY FILLER
MSDS Date:05/01/1992
FSC:8030
NIIN:00N041501
=== Responsible Party ===
Company Name:COMPOSITITE INC
Address:265 S WEST ST
City:LEBANON
State:OH
ZIP:45036
Country:US
Info Phone Num:800-398-6543
Emergency Phone Num:800-424-9300(CHEMTREC)
CAGE:CMPST
=== Contractor Identification ===
Company Name:COMPOSITITE INC
Address:265 S WEST ST
Box:City:LEBANON
State:OH
ZIP:45036
Country:US
Phone:800-424-9300(CHEMTREC)
CAGE:CMPST

=============  Composition/Information on Ingredients  =============

Ingred Name:TALC (POWDER), CONTAINING NO ASBESTOS FIBERS
CAS:14807-96-6
RTECS #:WW2710000
Fraction by Wt: 50-55%
OSHA PEL:2 MG/M3 RDUST
ACGIH TLV:2 MG/M3 RDUST

Ingred Name:FIBROUS GLASS
RTECS #:LK3651000
Fraction by Wt: 1-5%
OSHA PEL:15 MG/M3 (MFR)
ACGIH TLV:10 MG/M3 DUST

Ingred Name:UNSATURATED POLYESTER RESIN
Fraction by Wt: 35-40%

Ingred Name:STYRENE (MONOMER)
CAS:100-42-5
RTECS #:WL3675000
Fraction by Wt: 5-10%
OSHA PEL:50 PPM, 100 STEL
ACGIH TLV:50 PPM, 100 STEL,S
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:YES	 OSHA:NO
Health Hazards Acute and Chronic:IRRITATING TO SKIN, EYE, AND ALL PARTS
    OF RESPIRATORY TRACT. MAY CAUSE DEPRESSION OF NERVOUS SYSTEM AND BE
    SOMEWHAT ANESTHETIC.
Explanation of Carcinogenicity:STYRENE: GROUP 2B, IARC MONOGRAPHS , VOL
    SUPL 7, P. 345, 1987 .
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYE: FLUSH PROMPTLY WITH COPIOUS AMOUNTS OF WATER FOR AT
    LEAST 15 MINUTES, SEEK MEDICAL ATTENTION IMMEDIATELY. SKIN: WASH
    THORO WITH SOAP AND WATER. REMOVE CONTAMINATED CLOTH AND SEEK
    MEDICAL ATTENTIO N IF NECESSARY. INHAL: REMOVE TO A WELLVENTILATED
    AREA, USE OXYGEN OR ARTF RESP AS REQUIRED. SEEK MEDICAL ATTENTION
    IMMED. INGEST: DO NOT INDUCE VOMITING. SEEK MED ATTN IMMED.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:90F,32.2C
Lower Limits:1.1%
Upper Limits:6.1%
Extinguishing Media:WATER FOG, DRY CHEMICAL, FOAM AND CARBON DIOXIDE,
    OR ANY CLASS B EXTINGUISHING AGENT.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:IF EXPOSED TO ELEVATED TEMPERATURE FOR
    EXTENDED LENGTH OF TIME, SPONTANEOUS EXOTHERMIC POLYMERIZATION MAY
    OCCUR RESULTING IN VIOLENT RUPTURE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:EXTINGUISH ALL SOURCES OF FLAME/IGNITION.
    ABSORB WITH INERT MATERIAL SUCH AS VERMICULITE OR SAND. SWEEP UP
    AND COLLECT IN CONTAINERS TO DISPOSE OF AS SOLID WASTE. WASH AREA
    WITH TRI SODIUM PHOSPHATE A ND WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE BELOW 90F IN COOL, DRY PLACE.
    KEEP AWAY FROM SOURCES OF HEAT & IGNITION. USE EXPLOSION PROOF
    EQUIPMENT.
Other Precautions:OPEN CONTAINERS SLOWLY TO RELIEVE ANY INTERNAL
    PRESSURE. USE W/ADEQUATE VENTILATION. KEEP OUT OF REACH OF
    CHILDREN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF PERSONAL EXPOSURE CANNOT BE CONTROLLED BELOW
    APPLICABLE LIMITS BY VENTILATION, WEAR A PROPERLY FITTED ORGANIC
    VAP/PARTICULATE RESPIRATOR APPROVED BY NIOSH/MSHA FOR PROTECTION
    AGAINST MATERIALS.
Ventilation:ANY COMBINATION OF LOCAL & GENERAL VENTILATION TO DRAW
    FUMES AWAY FROM WORKERS.
Protective Gloves:PLASTIC/RUBBER CHEMICAL RESISTANT.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PROTECTIVE CLOTHING, SHOES, EYE WASH
    STATION, AND SAFETY SHOWERS SHOULD BE AVAILABLE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
BP: 295F,146C (STYRENE). VP: 4.5@20F (STYRENE).

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:SUPP DATA
Vapor Pres:SUPP DATA
Vapor Density:HVR/AIR
Spec Gravity:1.8
Evaporation Rate &amp; Reference:SLOWER THAN BUTYL ACETATE
Appearance and Odor:PIGMENTED PASTE, TYPICAL STYRENE ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, PEROXIDES, OTHER OXIDIZING AGENTS.
Stability Condition to Avoid:STORAGE IN OPEN CONTRS, PRLNGD STORAGE
    ABOVE 100F, EXPOSURE TO EXCESSIVE HEAT/OPEN FLAMES.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Conditions to Avoid Polymerization:MAY OCCUR IF EXPOSED TO HIGH
    TEMPERATURE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE,
    AND LOCAL REGULATIONS REGARDING WASTE.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.