PPG INDUSTRIES -- FLEXATIVE, DX369 -- 8010-00F006018
===================== Product Identification ===================== Product ID:FLEXATIVE, DX369 MSDS Date:01/01/1987 FSC:8010 NIIN:00F006018 === Responsible Party === Company Name:PPG INDUSTRIES/CLEVELAND, OH 44111 Emergency Phone Num:(304) 843-1300 CAGE:EO498 === Contractor Identification === Company Name:PPG INDUSTRIES INC Address:260 KAPPA DR Box:City:PITTSBURGH State:PA ZIP:15238-5000 Country:US Phone:412-963-5822/304-843-1300 CAGE:PPG01 Company Name:PPG INDUSTRIES/CLEVELAND, OH 44111 CAGE:EO498 ============= Composition/Information on Ingredients ============= Ingred Name:METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III) CAS:78-93-3 RTECS #:EL6475000 Fraction by Wt: 10% OSHA PEL:200 PPM/300 STEL ACGIH TLV:200 PPM/300STEL 9192 EPA Rpt Qty:5000 LBS DOT Rpt Qty:5000 LBS Ingred Name:TOLUENE (SARA III) CAS:108-88-3 RTECS #:XS5250000 Fraction by Wt: 40% OSHA PEL:200 PPM/150 STEL ACGIH TLV:50 PPM; 9293 EPA Rpt Qty:1000 LBS DOT Rpt Qty:1000 LBS Ingred Name:ISOPHORONE DIISOCYANATE (SARA III) CAS:4098-71-9 RTECS #:NQ9370000 Fraction by Wt: <5% OSHA PEL:S 0.005PPM/0.02STEL ACGIH TLV:0.005 PPM; 9394 Ingred Name:ORGANIC TIN COMPOUND Fraction by Wt: <0.5% OSHA PEL:S, 0.1 MG/M3 (SN) ACGIH TLV:S, 0.1 MG/M3 (SN) Ingred Name:POLYMERIC ISOCYANATE Fraction by Wt: 45% ===================== Hazards Identification ===================== Effects of Overexposure:EYE/SKIN & RESP TRACT IRRIT/HEADACHE/DIZZINESS/STAGGERING GAIT/UNCONSCIOUSNESS OR COMA. ======================= First Aid Measures ======================= First Aid:INHALATION: REMOVE TO FRESH AIR. IF BREATHING DIFFICULTY PERSISTS, CONSULT PHYSICIAN. EYES: FLUSH WITH PLENTY OF WATER FOR 15 MINUTES. CALL PHYSICIAN. SKIN: WASH THOROUGHLY WITH SOAP AND WATER. ===================== Fire Fighting Measures ===================== Flash Point:20F PMCC Lower Limits:1.7% Extinguishing Media:CO2, DRY CHEMICAL OR FOAM Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE. FOG NOZZLES ARE PREFERABLE. Unusual Fire/Explosion Hazard:WATER TO COOL CLOSED CONTAINERS TO PREVENT PRESSURE BUILD-UP & POSSIBLE AUTOIGNITION OR EXPLOSION. ================== Accidental Release Measures ================== Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION (FLAMES, HOT SURFACES & ELECTRICAL, STATIC OR FRICTIOL SPARKS). AVOID BREATHING VAPORS. VENTILATE AREA. REMOVE WITH INERT ABSBENT AND NON-SPARKING TOOLS. ====================== Handling and Storage ====================== Handling and Storage Precautions:DON'T STORE >120F. STORE LARGE QUANTITIES IN BUILDINGS DESIGNED & PROTECTED FOR STORAGE OF NFPCLASS IB FLAMMABLE LIQUIDS. DON'T TAKE INTERNALLY. Other Precautions:INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING & INHALING CONTENTS CAN BE HARMFUL OR FATAL. DON'T FLAME CUT, BRAZE OR WELDITHOUT NIOSH APPROVED RESPIRATORS OR APPROPRIATE VENTILATION. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:POSITIVE AIR SUPPLIED RESPIRATOR APPROVED NIOSH/MSHA TC19C. Ventilation:PROVIDE LOCAL EXHAUST VENTILATION TO KEEPAIR Evaporation Rate & Reference:SLOWER THAN ETHER Percent Volatiles by Volume:57.2 ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES WATER, ALCOHOLS, AND STRONG BASES. Hazardous Decomposition Products:CO, NOX, HYDROGEN CYANIDE, ISOPHORONE DIISOCYANATE. ==================== Disposal Considerations ==================== Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE & FEDERAL REGULATIONS. DON'T INCINERATE CLOSED CONTAINERS. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.