ILLINOIS BRONZE PAINT CO -- 8078-8082 COLORWORKS GENUINE LACQUER -- 8010-00F024040 
=====================  Product Identification  =====================

Product ID:8078-8082 COLORWORKS GENUINE LACQUER
MSDS Date:01/01/1989
FSC:8010
NIIN:00F024040
=== Responsible Party ===
Company Name:ILLINOIS BRONZE PAINT CO
Address:300 EAST MAIN ST
City:LAKE ZURICH
State:IL
ZIP:60047
Country:US
Info Phone Num:(312) 438-8201
Emergency Phone Num:(800) 228-5635
CAGE:91794
=== Contractor Identification ===
Company Name:ILLINOIS BRONZE PAINT COMPANY
Address:300 EAST MAIN STREET
City:LAKE ZURICH
State:IL
ZIP:60047-2580
Country:US
Phone:800-228-5635
CAGE:91794

=============  Composition/Information on Ingredients  =============

Ingred Name:ETHYLENE GLYCOL PROPYL ETHER, EKTASOLVE EP
CAS:2807-30-9
RTECS #:KM2800000
Fraction by Wt: 0-6%

Ingred Name:ACETONE; DIMETHYL KETONE
CAS:67-64-1
RTECS #:AL3150000
Fraction by Wt: 13%
OSHA PEL:1000PPM
ACGIH TLV:750PPM/1000STEL;9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:METHANOL (METHYL ALCOHOL), COLUMBIAN SPIRITS
CAS:67-56-1
RTECS #:PC1400000
Fraction by Wt: 3%
Other REC Limits:200 PPM
OSHA PEL:S,200PPM/250STEL
ACGIH TLV:S,200PPM/250STEL; 93
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:HYDROCARBON PROPELLANT, PETROLEUM GASES LIQUEFIED
    SWEETENED, C3-7	      *92-2*
CAS:68476-86-8
Fraction by Wt: 20%

Ingred Name:INERT RESINS & PIGMENTS
Fraction by Wt: BALANCE

Ingred Name:2-BUTANONE (METHYL ETHYL KETONE) (MEK)
CAS:78-93-3
RTECS #:EL6475000
Fraction by Wt: 9-12%
Other REC Limits:590 MG/CUM
OSHA PEL:200 PPM
ACGIH TLV:590 MG/CUM
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:2-BUTOXYETHANOL (ETHYLENEGLYCOL MONOBUTYL ETHER), BUTYL
    CELLOSOLVE, BUTYL GLYCOL, GLYCOL ETHER EB
CAS:111-76-2
RTECS #:KJ8575000
Fraction by Wt: 0-3%
Other REC Limits:25 PPM (SKIN)
OSHA PEL:S, 50 PPM
ACGIH TLV:S, 25 PPM; 9293

Ingred Name:ISOPROPANOL (ISOPROPYL ALCOHOL), 2-PROPANOL, DIMETHYL
    CARBINOL
CAS:67-63-0
RTECS #:NT8050000
Fraction by Wt: 0-4%
Other REC Limits:400 PPM
OSHA PEL:400 PPM
ACGIH TLV:400 PPM

Ingred Name:ISOBUTYL ACETATE
CAS:110-19-0
RTECS #:AI4025000
Fraction by Wt: 12-15%
Other REC Limits:150 PPM
OSHA PEL:150 PPM
ACGIH TLV:713 MG/CUM
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:ISOPROPYL ACETATE
CAS:108-21-4
RTECS #:AI4930000
Fraction by Wt: 5-7%
Other REC Limits:250 PPM
OSHA PEL:250 PPM
ACGIH TLV:1040 MG/CUM

Ingred Name:TOLUENE  (SARA III)
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: 14-16%
Other REC Limits:375 MG/CUM
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHALATION: CENTRAL NERVOUS SYSTEM
    DEPRESSION, HEADACHE, DIZZINESS, NAUSEA, LOSS OF CONSCIOUSNESS,
    PERMANENT BRAIN & NERVOUS SYSTEM DAMAGE, LIVER & CARDIAC
    ABNORMALITIES. SKIN: DEFATTING, DRYING, IRRI TATION, & DERMATITIS.
    EYES: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: CENTRAL NERVOUS SYSTEM DEPRESSION,
    HEADCHE, DIZZINESS, NAUSEA, LOSS OF CONCIOUSNESS, PERMANENT BRAIN,
    & NERVOUS SYSTEM DAMAGE, LIVER & CARDIAC ABNORMALITIES. SKIN:
    DEFATTING, DRYING, IRRIT ATION, & DERMATITIS. EYES: IRRITATION.

=======================  First Aid Measures  =======================

First Aid:INHALATION: REMOVE TO FRESH AIR & PROVIDE OXYGEN IF BREATHING
    IS DIFFICULT. GIVE ARTIFICIAL RESPIRATION IF BREATHING STOPS. SKIN:
    WASH W/SOAP & WATER. EYES: FLUSH W/WATER FOR 15 MINS. OBTAIN EDICAL
    AT TENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point:-40F
Lower Limits:0.8%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:WEAR FULL PROTECTIVE EQUIPMENT INCLUDING
    SELF-CONTAINED BREATHING APPARATUS
Unusual Fire/Explosion Hazard:CANS WILL RUPTURE FROM INTERNALY PRESSURE
    AT 190F & DISCHARGE FLAMMABLE CONTENTS. WHEN HEATED TO
    DECOMPOSITION, TOXIC FUMES ARE FORMED.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL IGNITION SOURCES (FLAMES, HOT
    SURFACES, ELECTRICAL, STATIC OR FRICTIONAL SPARKS). AVOID BREATHING
    VAPORS. VENTILATE AREA. REMOVE W/INERT ABSORBENT.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DON'T STORE >120F. STORE LARGE
    QUANTITIES IN BUILDINGS DESIGNED & PROTECTED FOR STORAGE OF NFPA
    CLASS IA FLAMMABLE LIQUIDS.
Other Precautions:DON'T SPRAY IN EYES. DON'T PUNCTURE OR INCINERATE
    CANS. DON'T STICK PIN OR PUT ANY SHARP OBJECTS INTO OPENING OF TOP
    OF CAN. FINGER MUST NOT PROTRUDE OVER FRONT OF EDGE OF SPRAY
    BUTTON.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH/MSHA TC23C OR EQUIVALENT RESPIRATOR
    WHEN >TLV.
Ventilation:SUFFICIENT IN VOLUME & PATTERN TO KEEP AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:90%

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:FLAMES, HOT SURFACES, ELECTRICAL, STATIC,
    OR FRICTIONAL SPARKS
Hazardous Decomposition Products:CO, CO2, VARIOUS COMPLEX ORGANIC
    COMPOUNDS WHEN BURNED

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
    FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.