|
Acetylene, dissolved |
Hazard Statements
H220 - EXTREMELY FLAMMABLE GAS H231 - MAY REACT EXPLOSIVELY EVEN IN THE ABSENCE OF AIR AT ELEVATED PRESSURE AND/OR TEMPERATURE H280 - CONTAINS GAS UNDER PRESSURE; MAY EXPLODE IF HEATED OSHA-H01 - MAY DISPLACE OXYGEN AND CAUSE RAPID SUFFOCATION CGA-HG04 - MAY FORM EXPLOSIVE MIXTURES WITH AIR
Precautionary Statements
P202 - Do not handle until all safety precautions have been read and understood P210 - Keep away from Heat, Open flames, Sparks, Hot surfaces. - No smoking P271+P403 - Use and store only outdoors or in a well-ventilated place P377 - Leaking gas fire: Do not extinguish, unless leak can be stopped safely P381 - Eliminate all ignition sources if safe to do so P501 - Dispose of contents/container in accordance with container Supplier/owner instructions CGA-PG05 - Use a back flow preventive device in the piping CGA-PG13 - Fusible plugs in the top, bottom, or valve melt at 98 °C to 107 °C (208 °F to 224 °F). Do not discharge at pressures above 15 psig (103 kPa) CGA-PG06 - Close valve after each use and when empty CGA-PG11 - Never put cylinders into unventilated areas of passenger vehicles CGA-PG02 - Protect from sunlight when ambient temperature exceeds 52°C (125°F)
Manufacturer information
Name
Praxair Inc
Phone
1-800-772-9247
Address
10 Riverview Drive
Danbury, 06810-6268
PICTOGRAMS
HMIS
| HEALTH |
2 |
| FLAMMABILITY |
4 |
| PHYSICAL HAZARD |
2 |
| PERSONAL PROTECTION |
|
NFPA
0
4
0
ANTELOPE VALLEY COMMUNITY COLLEGE DISTRICT
Local data
SKU #
